Roof Tile Restoration
and Painting Services

At the heart of Tile Magic's popularity lies our unwavering commitment to excellence in roof restoration. Our customers continually choose us for our unparalleled expertise in roof restoration, recognizing our dedication to quality, durability, and aesthetic enhancement. With each roof restoration project we undertake, Tile Magic sets the gold standard, ensuring that our clients receive top-notch service thd discover why Tile Magic remains the preferred choice for exceptional roof restoration services time and time again.at stands the test of time. It's our meticulous approach to roof restoration, coupled with a deep understanding of our customers' needs, that distinguishes Tile Magic from the rest. Trust in our proven track record an

Typically, no more than 1/3 of the cost of re-roofing.

The job typically takes 1 to 2 days, unless there are unusual circumstances. (ex. extensive termite, dry rot replacement, etc.).

Before this very important question can be answered we believe you should first know what options are available. We will attempt to clarify what these options are, but ultimately the final decision is yours; we hope that knowing what your options are will assist you in making the right decision.

Since the condition of the roofing felt is the primary concern we thought it would be helpful to identify what roofing felt is made of, what function it serves, and what happens to it over a long period of time.

The type of felt typically used in roofing is called Asphalt Saturated Felt. It is manufactured by taking natural organic fibers that are then turned into a dry paper mat; this mat is then saturated by a high grade of oxidized asphalt to provide water resistance and dimensional stability. Felt primarily functions as a vapor barrier, and in a tile roof system as a secondary water shedding barrier in the event that water gets behind the tile. It is the nature of felt to break down once the oils in the felt have dried up due to long term exposure to nature’s elements. It is important to note that even though the felt paper may be dried up, that does not mean the roof is no longer waterproof.

Option #1: Tile Restoration

First an on-site visual inspection will be done of the tile roof to determine its current Condition and to address any areas of concerns. With over 35 years of combined roofing experience, our first objective is to make sure the tile roof will keep water out.

Over the years it has been our experience that leaks on tile roofs that were installed properly are typically the result of: Wind driven rain entering thru the weather-blocking at hip or ridge section due to a crack or break down in and Waterproofing at these areas, broken tiles, debris from trees etc. creating damming effects in roof valley areas Sealants cracked around roof flashings due to long term exposure to the weather and UV sun rays. All these Conditions can be repaired and a general maintenance will be performed to the roof prior to the start of our Tile Restoration Procedure.

Cost: Typically we can repair, perform a general maintenance and restore; (make your old tile roof look like new for about 1/3 the cost of buying a new roof)

Option #2: Felt Underlayment Replacement

This procedure would involve the lifting up and/or removal of all existing tile depending on the slope and layout of the roof. Typically one or more layers of new felt would be installed over the existing felt unless other arrangements have been made. Re-installation of the existing tile would then take place. If this is a procedure you are considering, we would recommend all new flashing and perimeter edge metal.

Costs: This is labor intensive procedure and therefore very expensive; costs could easily run $ 2.25 to $2.50 per sq. ft. which is more than 2X the costs of tile restoration. (Keep in mind that once you have spent all that money you will still have a roof that looks old)

Option #3: Buying a New Roof

Cost of a new tile roof is usually 3 to 4 times as much as you would have paid to have your old tile roof restored. You may also be replacing a roof system that may not have any leaks or at least a minimum amount that could have easily repaired. However, re-roofing is a valid option especially if you are planning a major design change or you are tired of the existing one.

The main raw materials used in the manufacturing of concrete tile are cement, fly ash, sand, aggregates, and water.

Concrete tile lasts indefinitely as long as it is properly maintained, cleaned, and broken tiles replaced. The tile actually gets harder with age.

When concrete tile is subjected to long-term exposure to nature’s elements (sun, rain, and wind), some tiles will begin to lighten or fade from their original color. These effects occur primarily as a result of oxidation on the tile surface.

This substance is moss and algae. Many tiles have rough surfaces by design or as the result of long-term exposure to the forces of nature and the environment; dirt, pollutants, and moisture attach themselves to this surface, and algae and moss growth occurs.

Algae and moss can be removed by a high-pressure water system (keep in mind that even though your tile may clean up nicely, without a sealer and/or coating with a biocide included, algae and moss will re-appear on your tile quickly).

Roofs near the coast and foothills are going to be exposed to a lot more moisture from the ocean and dew. North-facing roofs will exhibit the most algae because they receive less sun, which does not allow for the moisture on those roofs to dry adequately.

Vehicle emissions produce sulfur and nitrogen oxide, which combine with water vapor (overnight dew) to produce sulfuric and nitric acid (acid dust), which settle on the concrete tile’s surface and begin to deteriorate the concrete surface.

We hydro-wash the roof using high-pressure water only; we do not use any chemicals.

The predominant substances that are going to come off the roof are what nature and the environment put there, so any run-off won't be harmful to your family or pets. This would include algae, dirt, pollution, sediments, and organic oxides.

By pressure washing your concrete tile roof, you will not only remove the dirt, but you will also expose the pores of the tile, which will enable the surface of the tile to easily absorb moisture and create an ideal situation for algae and moss to come back faster.

Yes, however, we do not recommend it unless it is done by an experienced roofing professional. There is a proper way that roof tile should be walked on to keep it from breaking, or at least keep breakage to a minimum. (It also helps if you weigh less than 200 pounds).

Tile roofs do require a minimum amount of service for any number of reasons, especially if you have trees and foliage at or near the roof line. Pine needles, as well as other debris that accumulates on the roof, will create a damming effect in valley sections once moisture is introduced via rain or dew. Some sealants around pipes (roof penetrations) will crack due to movement between the structure and foundation as well as long-term UV exposure from the sun. Broken tiles are a result of foot traffic, painters, plumbers, etc., and objects being thrown on the roof.

We recommend an annual inspection of the roof before the rains start. As a part of our restoration procedure, we first replace any broken tile, inspect all roof penetrations, and re-seal them with high-grade sealants. Many roofers would charge several hundred dollars for this service alone; we include this service when we restore your tile roof.

Depending on the type of coating application, environment, and geographic location of the roof, our coating can last from 10 to 20 years.

We offer a 10-year limited transferable warranty against peeling, chipping, or cracking.

Colors can be selected from our main menu consisting of 16 basic colors, or we can create 100’s of custom color options to match an existing color or create a new color of your choice.

No problem; we can mix and match colors to accommodate most any color scheme you have.

There are multiple ways you can get in touch with us. You can call us at 951-817-4892. Or, if you prefer, you can use the contact form on our website. We look forward to speaking with you soon!